4 Layers Immersion Sliver Rogers PCB Manufacturing Prototype
|
Layer： |
4 Layer |
|
Material： |
Rogers |
|
PCB Thickness： |
1.0mm |
|
Cu Thickness： |
1.0 OZ |
|
Min Line W/S： |
0.1/0.1mm |
|
Surface Finish： |
Immersion Sliver |
|
Certificate： |
UL/ISO/TS16949/RoHS/IATF |
|
Application： |
Auto Electronics |
We will reply within 2 hours!
Product Parameters
Item | Specifica |
Layers | 1~32 |
Board thickness | 0.1mm-7.0mm |
Material | FR-4，CEM-1/CEM-3，PI，High Tg，Rogers |
Max panel size | 32"×48"(800mm×1200mm) |
Min hole size | 0.075mm |
Min line width | 3mil(0.075mm) |
Surface finish | OSP，HASL，Imm Gold/Nickel/Ag， Electric gold |
Copper thickness | 0.5-7.0OZ |
Soldermask | Green/Yellow/Black/White/Red/Blue |
Silkscreen | Red/Yellow/Black/White |
Min PAD | 5mil(0.13mm) |
Inter package | Vacuum |
Outer package | Carton |
Outline tolerance | ±0.75mm |
Hole tolerance | PTH：±0.05 NPTH：±0.025 |
Certificate | UL，ISO 9001，ISO14001，IATF16949 |
Special request | Blind hole+Gold finger + BGA |
Material Suppilers | Shengyi, KB, Nanya, ITEQ,etc. |
General Introduction of Rogers PCB
Rogers PCB is a type of high-frequency board that raw material is produced by Rogers company. It is different from the conventional PCB board—epoxy resin (FR4). It has no glass fiber in the middle and uses a ceramic base as the high-frequency material. Rogers has superior dielectric constant and temperature stability. Its dielectric constant thermal expansion coefficient is very consistent with copper foil, which can be used to improve the deficiencies of PTFE substrates.
One-stop Service Include
PCB Prototype | Quick Turn PCB | Single-Sided PCB |
Double-Sided PCB | Multilayer PCB | Rigid PCB |
Flexible PCB | Rigid-Flex PCB | LED PCB |
Aluminum PCB | Metal Core PCB | Thick Copper PCB |
HDI PCB | BGA PCB | High TG PCB |
PCB Stencil | Impedance Control PCB | PCB Assembly |
High-Frequency PCB | Bluetooth Circuit Board | Automotive PCB |
USB Circuit Board | Halogen-Free PCB | Antenna PCB |
